Cleaning - MedeScan JH-908 Instruction Manual

Table of Contents

Advertisement

8.【CLEANING】
8.1 Cleaning the ear domes
Remove any earwax buildup using the enclosed tool . Wipe clean
with a tissue or soft cloth.
8.2 Cleaning Tool:
Use a soft cloth or tissue to wipe any moisture, perspiration, or
debris from the surface of the tool.
1
3
2
-19-
8.3 Daily maintenance
It is important to keep your devices clean and dry. On a daily basis,
wipe them clean using a soft cloth or tissue. To avoid potential
damage from excess humidity or perspiration, the use of a drying
kit is also recommended.
All data in this manual, such as service time, charging time,
continuous working time, and charging times are derived from our
internal laboratory testing and meant for reference purposes only.
Your exact usage and times may differ depending on various
conditions and use patterns. It is a normal phenomenon to hear
some high-pitched whistling or buzzing when the hearing aid is at
a high volume level and not fitted well into the ear as a result of
mic feedback. If this occurs, lower the volume and adjust the
hearing aid within the ear. Also check to make sure you are
wearing the best size ear domes to ensure a proper fit in the ear
canal, as this may also induce some minor feedback if not snug in
the ear.
-20-

Advertisement

Table of Contents
loading

Table of Contents