Table of Contents
Advertisement
en operation
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 26
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
12.6 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 27.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 17
If required, add the care product.
3.
Push in the detergent drawer.
4.
12.7 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 27
Press
.
▶
a The display shows the programme
duration or the "Ready in" time.
a After the programme has ended,
the display shows: End.
28
12.8 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Requirement: A programme has
started.
→ "Starting the programme",
Page 28
Press
.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
.
5.
12.9 Cancelling the pro-
gramme
Press
.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Ξέβγαλμα programme.
– If the water level is high, start
the Στύψιμο programme or se-
lect a suitable programme for
draining.
→ "Programmes", Page 22
Remove the laundry.
3.
→ "Unloading the laundry",
Page 28
12.10 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
Advertisement
Table of Contents
