Advertisement
1.
Remove the battery: press the battery release latch in and at the same time pull the battery pack off.
2.
To insert the battery, push the battery pack onto the contacts of the tool.
2.5.3 FITTING THE AUXILIARY HANDLE (FIG. 1)
The auxiliary handle (6) can be attached to the angle grinder in 3 different positions: left and right and top of
head.
2.5.4 ASSEMBLY THE PROTECTIVE GUARD (FIG. 2 – 3)
1. Loosen the clip of the protective guard (7) by pulling lock lever of protective guard (1) outward.
2. Turn the protective guard so that uncovered part of the disc is as far apart as possible from the hand on
main handle (3).
3. Fix the protection guard by pushing the lock lever inwards (the protective guard should no longer be able
to move).
NOTE: If the protective guard can not be fixed firmly by the lock lever (1), use a hexagon wrench to
tighten the hexagon nut.
2.5.5 REPLACING THE GRINDING DISC (FIG. 4 – 5)
Beware – a disc which has been used may be very hot!
Depress and hold down the spindle lock button (2) to secure the spindle.
Turn the shaft until it locks.
Remove the outer flange (a) and backing flange (b) by using the two-hole spanner provided.
Fit the desired disc (8) on the spindle and replace the outer flange and backing flange. Release the
spindle lock.
Important! Only ever press the spindle lock when the motor and grinding spindle are at a
standstill!
You must keep the spindle lock pressed while you change the wheel !
For grinding wheels up to approx. 3 mm thick, screw on the flange nut with the flat side facing the grinding
wheel.
2.5.6 SWITCHING ON / OFF (FIG. 6)
Before engage the ON/OFF switch button, check that the grinding disc is properly fitted and
run smoothly, the outer flange is well tightened.
Connect the battery pack onto the angle grinder body.
To switch on the angle grinder, push the On/Off switch(4) to the right a little and then forward to catch
the lock-fixed slot.
When you press the switch "O", the tool returns off.
Do not let go of grinder until it has stopped running.
Advertisement
