Table of Contents
Advertisement
Recharging Your Ni-MH Batteries:
To recharge your Ni-MH Batteries using your Wired Receiver, please follow the instructions below:
1. Make sure your computer is turned on and your Wired Receiver is connected to your computer.
2. Press down and then slide off the Battery Compartment Cover from your Wired Receiver.
3. Place two Ni-MH Batteries into the Battery Compartment following the battery orientation guide printed inside the compartment.
4. Replace the Battery Compartment Cover back onto your Wired Receiver.
5. The Charge LED will turn solid red and the installed batteries will begin charging.
6. When the LED indicator turns off, the batteries are fully charged.
10
Advertisement
Table of Contents
