Product Assembly - cecotec FORCESILENCE 790 FRESHESSENCE IONIC Instruction Manual

• Do not operate the product in the presence of flammable
substances such as gas, vapour, mist or dust.
• Do not carry out any reparation task by yourself, instead
contact the Technical Support Service of Cecotec.
• DO NOT use or store the device near heat sources (heaters,
stoves etc.).
• Do not immerse the cord, plug, or the appliance in water or
any other liquid, nor expose the electrical connections to
water. If the device falls into water, do not touch it and dis-
connect it from the power supply immediately.
• The appliance is not intended to be used by children under
the age of 8. It can be used by children over the age of 8, as
long as they are given continuous supervision.
• This appliance can be used by children aged 8 and above,
and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge, as long as
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
• Supervise young children to make sure that they do not play
with the appliance. Close supervision is necessary when
the appliance is being used by or near children.
• This appliance is designed only for domestic use. It is not
appropriate for commercial or industrial use.
• This appliance is designed only for domestic use. It is not
appropriate for commercial or industrial use.

3. PRODUCT ASSEMBLY

1. Install the five castors on the base.
2. Install the main body to the base and use the base fixing element to fix the base tightly.
3. Connect the connection cables, place them inside the main body and use the screw to fix it.
4. Place the back grid in its position and use the back-grid fixing element to install it on the motor
holder.
5. Install the blades on to the motor shaft and screw the blade fixing element to ensure the
blades are properly attached.