Advertisement
The R/S Function
Key
SIMATIC VPU200/565 Programming Manual
The R/S (Ramp/Soak) function key is used to create or modify a Ramp/Soak
table for a particular loop. To begin the operation, first place the cursor on
the entry in the Loop Directory for which a Ramp/Soak table will be built or
modified. You should also be sure that the Ramp/Soak entry in the Loop
Programming Table is answered Yes.
Once the cursor is positioned, press the R/S (F6) function key. The
Ramp/Soak Programming Table is then displayed. If No was given for the
Ramp/Soak entry in the Loop Programming Table, the following message
appears:
THE RAMP/SOAK IS NOT SELECTED IN THE LOOP TABLE
Table 3-2 shows an example of a RAMP/SOAK Programming Table. The
function keys are then labeled as shown and described following the table.
Table 3-2 RAMP/SOAK Programming Table
Programming Loops
3-9
Advertisement
Chapters
