(5) Loading the application, with desired parameterization. (6) If the device is enabled, you can test the requested functions (also possible by using the ETS-Software). MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany Phone: +49-2263-880 • knx@mdt.de • www.mdt.de...
C stands for communication, R for read, W for write, T for transmit and U for update. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany Phone: +49-2263-880 • knx@mdt.de • www.mdt.de...
„Alarm OFF“ [5 min] message. Only visible if "Behaviour at alarm end" is set to "reset automatically". Table 2: Settings – Leakage sensor MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany Phone: +49-2263-880 • knx@mdt.de • www.mdt.de...
Page 7
A delay for "Alarm OFF" can only be set with the setting "reset automatically". With "reset via object", the reset takes place directly via object and without delay. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany Phone: +49-2263-880 • knx@mdt.de • www.mdt.de...
The units are approved for operation in the EU and bear the CE mark. Use in the USA and Canada is not permitted! 6.4 History V1.0 First Version of Technical Manual DB V1.0 12/2022 MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany Phone: +49-2263-880 • knx@mdt.de • www.mdt.de...