Ethernet Menu; Http Ports - visual engineering BWC Manual

All manuals and user guides at all-guides.com
Visual Engineering
Video solutions. Integrated
BWC September 2020

Ethernet Menu

The camera's network parameters
can be set by selecting the Ethernet
menu.
The camera can operate with a fixed
IP address, or can be allocated an
IP address from the network. This is
configured using the enable/disable
Use DHCP Server button.

HTTP Ports

The default HTTP port and ONVIF
HTTP port to control and configure
the camera is 80.
Selecting one of the five options as
shown in the drop down box on the
right will set both the HTTP port and
ONVIF HTTP port number.
Moving the camera's HTTP port
number should only be carried out
by users confident of keeping a track
on what settings have been applied
to the camera.
Setting a new IP address and new
HTTP port simultaneously should be
avoided.
Following changes.....users should
press the submit button to enable
changes.
visualengineering.co.uk Page 12