Advertisement
Battery Installation and Power
• For longer life, use alkaline batteries.
• Open the fasteners on the back of
the toy.
• Pull the electronics box out of the toy
to access the battery compartment.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the door.
• Insert two, new AA (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• Slide the power switch ON
• Close the fasteners.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and back on.
• When the sound or light from this toy
become faint or stop, it's time for an
adult to change the batteries.
or OFF
.
Advertisement
