Controls And Indicators - Sharp XL-BB20D Operation Manual

Precautions (Continued)
● If the unit does not work properly, unplug and plug it in
again. Then turn on the unit.
● In case of an electrical storm, unplug the unit for safety.
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● Do not place anything on top of the unit.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your lo-
cal SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental as-
pects of battery disposal.
● This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).

Controls and indicators

6
■ Front panel
1. Timer Indicator ................................................. 18, 19
2. Remote Sensor ........................................................ 7
3. Disc Tray ..................................................................11
4. Bluetooth Standby Indicator................................... 6
5. Headphone Link Indicator..................................... 10
6. Left Speaker
7. USB Terminal ......................................................... 13
8. Headphone Socket ................................................ 20
9. ON/STANDBY Button ................................7, 9, 11, 21
10. Audio In Socket...................................................... 20
1 2 3
10 12 14
7 8
11 13 15
9
Page
EN-4
● The apparatus is designed for use in moderate cli-
mates.
Warning:
The voltage used must be the same as that specified on this
unit. Using a higher voltage is dangerous and may result in
a fire or other type of accident causing damage.
SHARP will not be held responsible for any damage result-
ing from such usage.
■ Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high vol-
umes. Excessive sound pressure from earphones and
headphones can cause hearing loss.
4 5
16
17 18
11. Input Button ....................................................... 7, 20
12. Bluetooth Pairing Button ...................................... 10
13. CD/USB Stop Button ..............................................11
14. Tuner Preset Down, Auto Tuning Down, CD/USB/
Bluetooth Skip Down Button .......... 8, 10, 11, 13, 14, 16
15. Disc/USB/Bluetooth Play or Pause Button ........ 10, 11
16. Tuner Preset Up, Auto Tuning Up, CD/
USB/Bluetooth Skip Up Button ....... 8, 10, 11, 13, 14, 16
17. Volume Control ........................................................ 7
18. Disc Tray Open/Close Button ................................11
19. Right Speaker
20. Duct Port
19 20
B503
(Rear view)
Page