Page 1
WE-EF LIGHTING Installation and Maintenance Instructions Wall Luminaires surface Mounted QLS410 LED QLS420 LED Do not open during installation Surge Protection This product is factory-sealed. This product features built-in surge protection circuitry in compliance Refer to the instructions contained in this with applicable standards.
Light Source Maintenance Apart from cleaning the product’s exterior surfaces, no special maintenance work is required. Do not use high-pressure cleaners. In case of component failure due to abnormal circumstances or at end of life, replacement must be carried Warning: Do not open luminaire while mains supply is switched on.
Fixture is intended to be mounted over a than the original manufacturer, then the warranty UL listed junction box (not supplied by WE-EF), will no longer be valid and shall become the full use provided wall plate to cover boxes larger responsibility of the modifying person/organisation.