Related Manuals for 4B TouchSwitch TS1V4HT
Summary of Contents for 4B TouchSwitch TS1V4HT
- Page 1 TouchSwitch™ US Patent # 6,731,219 Other Patents Pending Installation and Set-Up TS1V4HT & TS1V3HT Technology Innovation Quality Value www.go4b.com Rev2 June 2014...
- Page 2 The proper installation of the equipment, and regular maintenance and inspection is equally important in continuing the proper operation and safety of the product. The proper installation and maintenance of all our products is the responsibility of the user unless you have asked 4B to perform these tasks.
- Page 3 Retain the Operation Manual and other important maintenance and service documents provided by 4B and have them readily available for people servicing your 4B equipment. Should you have any questions, please call the 4B location who supplied the product or the 24-hour hotline number in the USA -309-698-5611.
- Page 4 TouchSwitch™ Installation and Set-Up Introduction: The TouchSwitch™ from 4B is an electronic limit switch with no moving parts. When a belt misaligns or a pulley moves over and contacts the sensor, the built in solid-state electronic circuitry detects the lateral force of the belt or pulley and activates a voltage free relay contact.
- Page 5 Supply Voltage: 12 vdc (TS1V3HT) 24 vdc (TS1V4HT) Power Consumption: 60mA 50mA Indication: Red LED indicates when powered up and relay is energized. Adjustment: Force Sensitivity is factory set to 8 lb (3.6 Kg) approx. Output: Voltage free changeover relay contact rated at 5A 250vac Non-inductive.
- Page 6 Set-up and Test: Observe that the red LED on the sensor housing is on and the belt or pulley is not touching the sensor. Slowly turn the test knob clockwise by hand, until the LED goes out. Check that alarms and shutdowns work as expected. Turn the test knob back to its original position.
- Page 7 TO AS 4B TO THE ORIGINAL PURCHASER AGAINST DEFECTS IN WORKMANSHIP OR MATERIALS UNDER NORMAL USE FOR ONE (1) YEAR AFTER DATE OF PURCHASE FROM 4B. ANY PRODUCT DETERMINED BY 4B AT ITS SOLE DISCRETION TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP...
- Page 8 Document Revision Date revised Revisions made August 2013 Revision 1 released June 2014 Updated fixing hole centre info in installation Technology Innovation Quality Value www.go4b.com Rev2 June 2014...