Table of Contents

Advertisement

Before use, always visually inspect the product to ensure
that blades, blade nuts, and the cutter assembly are not
worn or damaged.
Never direct discharged material towards anyone.
Plan the mowing pattern to avoid discharge of material
towards bystanders, roads, sidewalks, windows, and
cars. Avoid discharging material against a wall or
obstruction, which may cause the material to ricochet
back towards the operator.

OPERATION

Operating a zero-turn mower is different from operating a
standard riding mower. Zero-turn mowers are rear-wheel
drive. The wheels operate independently based on the
position of the joystick. Practice operating the product
in a large, level, and open area using the instructions
that follow before mowing your grass. Once you can
comfortably and reliably perform the manoeuvres, you
are ready to mow your grass.
Before starting the product:
Check the brake operation.
Check the tyre pressure.
Check for loose fasteners.
Make sure that all guards are in place and working
properly.
Check the side discharge chute safety interlock
system.
Test the operator presence safety interlock system.
Adjust the seat to the preferred position.
Verify the battery charge level.
Do not mow in reverse unless absolutely necessary.
Before and while reversing, look behind and down for
small children, bystanders, and pets.
Never leave a running product unattended. Always turn
off the blades, engage the parking brake, stop the motor,
and remove the start key before dismounting.
The product must be started with the user properly
seated. Never start the product if:
not all four wheels are on the ground
the side discharge chute is exposed and is not
protected by the mulch cover
hands and feet of all persons are not clear of the
cutting enclosure
Never use the product in a closed area.
Turn on the motor carefully according to instructions,
and keep hands and feet away from blades. Do not put
hands or feet near or under rotating parts.
Stop the blade when crossing gravel surfaces to avoid
discharging gravel and rocks. Drive the product slowly
and carefully to avoid loss of control.
Use extra care when approaching blind corners, shrubs,
trees, or other objects including overhanging shrubs,
which may block your view.
Slow down before turning.
Watch for traffic when operating near roadways. Do not
operate the mower on roadways.
WARNING! Slopes are a major factor related to loss of
control and tip-over accidents, which can result in severe
injury or death. Operation on all slopes requires extra
caution. If you cannot back up the slope or if you feel uneasy
on it, do not mow it. Never use the product on steep slopes
4
Original Instructions
greater than 15°. Make a copy or cut out the slope guide at
the back of this manual, and use it to determine if your slope
is too steep for safe operation.
Mow up and down; not across the face of slopes.
Avoid holes, ruts, bumps, rocks, property stakes, or
other hidden objects. Uneven terrain could overturn
the product. Tall grass can hide obstacles.
Use a slow speed so you will not have to stop
suddenly or accidentally accelerate while on a slope.
Do not mow on wet grass when on a slope. Tyres
may lose traction and you may lose control.
Do not shift to neutral and coast downhill, which may
cause you to lose control of the product. Always use
the brakes when travelling down the slope.
Avoid starting, stopping, or turning on a slope. If
the tyres lose traction, disengage the blades and
proceed slowly straight down the slope.
Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction,
which could cause the product to roll over.
Use extra care while using the product with
attachments; they can affect the stability of the
product. Do not use the product on steep slopes
greater than 15°.
Do not try to stabilise the product by putting your foot
on the ground.
Do not use the product near drop-offs, ditches,
excessively steep slopes, or embankments. The
product could suddenly roll over if a wheel goes over
the edge or if the edges cave in and result in death
or serious personal injury.
Operate the product only in temperatures between 0°C
and 40°C.
CHARGER SAFETY WARNINGS
The charger is for indoor use only.
Do not recharge primary cells (non-rechargeable).
Before every use, examine the supply cord for damage.
If there are signs of damage, it must be replaced by a
qualified person at an authorised service centre to avoid
a hazard.
Charge the product indoors, in a well-ventilated area. Do
not charge the product in a confined space.
The charger is equipped with a plug featuring a grounding
pin and must be plugged into a matching outlet that has
been properly installed and grounded in accordance with
all local codes and ordinances. Do not use adaptors or
modify the plug provided. If it does not fit the outlet, have
the proper outlet installed by a qualified electrician.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! Risk of fire, explosion, or burns. Do not
disassemble, expose to heat above 60˚C, or incinerate the
battery pack.
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse the product,
battery pack, or charger in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-
containing products, etc., can cause a short circuit.
Charge the battery pack in a location where the ambient
temperature is between 10 °C and 38°C.

Advertisement

Table of Contents
loading

Table of Contents