Table of Contents
Advertisement
Figure 3.4.6.3 Advanced Setup – Routing –RIP
To activate RIP for the device, select the 'Enabled' radio button for Global RIP Mode. To configure an
individual interface, select the desired RIP version and operation, followed by placing a check in the
'Enabled' checkbox for the interface. Click the 'Save/Apply' button to save the configuration, and to start or
stop RIP based on the Global RIP mode selected.
3.4.7 Advanced Setup – DNS
3.4.7.1 Advanced Setup – DNS – DNS Server
Figure 3.4.7.1 Advanced Setup –DNS – DNS Server
If 'Enable Automatic Assigned DNS' checkbox is selected, this router will accept the first received DNS
assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s) during the connection
establishment. If the checkbox is not selected, enter the primary and optional secondary DNS server IP
addresses. Click 'Save' button to save the new configuration. You must reboot the router to make the new
configuration effective.
3.4.7.2 Advanced Setup – DNS – Dynamic DNS
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in any of the many
domains, allowing your DSL router to be more easily accessed from various locations on the Internet.
Advertisement
Table of Contents
