UTStarcom WA3003G4 User Manual page 52

Vdsl 2 modem
Table of Contents

Advertisement

Figure 3.4.4.3.a Advanced Setup – Security – Parental Control
Click "Add" to set restriction rules as following:
Figure 3.4.4.3.b Advanced Setup – Security – Parental Control – Add Restrictions
3.4.5 Advanced Setup – Quality of Service
3.4.6 Advanced Setup – Routing
WA3003G4 provides three different routing types as below:
3.4.6.1 Advanced Setup – Routing – Default Gateway
If Enable Automatic Assigned Default Gateway checkbox is selected, this router will accept the first received
default gateway assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s). If the
checkbox is not selected, enter the static default gateway AND/OR a WAN interface. Click 'Save/Apply'
button to save it.
NOTE: If changing the Automatic Assigned Default Gateway from unselected to selected, You must reboot
the router to get the automatic assigned default gateway.

Advertisement

Table of Contents
loading

Table of Contents