EZ-Guide 500 Quick Reference Card

EZ-Guide® 500 Lightbar Guidance System
with the Field-IQ
Lightbar power cable
CAN-TBC active terminator
cable (with power)
(P/N 75522)
Power cable with switch
(P/N 75743)
Note: For more information on system calibration and settings, see the Field-IQ section in the EZ-Guide Lightbar Guidance System
Version 5.10 Release Notes.

Field-IQ Master Switch Box

< = >
Item
Incement/decrement switch
<
Rate switch
=
LED indicator
>
Automatic/Manual section
?
control switch
Master switch
@
™
Crop Input Control System Quick Reference Card

COnneCtinG tHe SYSteM

(P/N 62817)
Field-IQ master switch box
(P/N 75050-01)
12-section switch box
(optional)
Cable assembly, power
to hitch connection
? @
Positions
Rate 1, Rate 2, Manual Rate
You can switch from Automatic to
Manual mode while traveling.
Off, On, Jump Start
Use the jump start function if you
lose a GPS signal or you want
to start applying before your
implement is up to speed.
EZ-Guide 500 lightbar
Remote foot switch
(optional)
(P/N 60490)
(P/N 75060-01)
(P/N 76941)

Field-IQ 12-section Switch Box

< >
Item
LED indicator
<
Section switches
=
Space to write which row the switch controls.
>
If the Master
Switch section
switch is set to...
Automatic
Manual
1
Cable assembly, CAN cab to
hitch connection
(P/N 77368)
IBRC to DPT adaptor cable
(optional) (
P/N 77413)
=
And the 12-section Then the section
switch box is...
position is ...
Up / On controlled by the display.
Down / Off off.
Up / On turned on
Down / Off off