Electrolux EKG611A1OX User Manual page 12

12 www.electrolux.com
Oven function
MIN -
240°C
8.2 Ignition of the oven gas
burner
CAUTION!
When turning on the oven
burner the oven door must
be opened.
CAUTION!
Make sure that the lid is
opened. When using the
oven the lid has to be
opened to avoid over-
heating.
Oven safety device:
The gas oven has a
thermocouple. It stops the
gas flow if the flame goes
out.
1. Open the oven door.
2. Ignite the oven gas burner.
• For ignition on the spark
generator button push and hold
the button
turn the knob for the oven
functions counterclockwise to the
maximum heat settings and push
it to light the burner. Release the
spark generator button when
burner lights.
Keep the knob for the oven functions
pushed for 15 seconds or less to let
the thermocouple warm up. If not, the
gas flow is interrupted.
8.3 Manual ignition of oven gas
burner
Heat settings
Grilling
Oven lamp
. At the same time
Application
Range of temperature adjustment.
To grill flat food in the middle of the grill. To
make toast.
To illuminate the oven interior.
To use this function, press the button for the
lamp.
In case of absence of the electricity you
can ignite the oven burner without an
electrical device.
1. Open the oven door.
2. Hold the flame near the hole in the
bottom of the oven cavity.
3. At the same time push the knob for
the oven functions and turn it
counterclockwise to the maximum
gas flow position.
4. When the flame comes on, keep the
knob for the oven functions pushed
on the maximum gas flow position for
15 seconds or less to let the
thermocouple warm up.
Do not keep the knob for the
oven functions pushed for
more than 15 seconds. If the
oven burner does not light
after 15 seconds, release
the knob for the oven
functions, turn it into off
position, open the oven door
and try to light the oven
burner again after minimum
1 minute.
8.4 After igniting the oven gas
burner
1. Release the knob for the oven
functions.
2. Close the oven door.