Table of Contents
Advertisement
Clock function
MINUTE MINDER
00:00
COUNT UP TIMER
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
or
to set the hours.
2. Press
to confirm and switch to set
the minutes.
The display shows
hour. "00" flashes.
3. Press
or
to set the current
minutes.
4. Press
to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
flashes in the display.
6.3 Setting the DURATION
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Press
or
to set the minutes and
then the hours for DURATION time.
Press
to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
4. Press any button or open the oven
door to stop the acoustic signal.
Application
Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates. It is on immediately when the oven
starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
5. Turn the knob for the oven functions
6.4 Setting the END
and
1. Set an oven function.
2. Press
3. Press
and the set
At the set time an acoustic signal sounds
for 2 minutes.
in the display. The appliance deactivates
automatically.
4. Press any button or open the oven
5. Turn the knob for the oven functions
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
3. Press
The display shows flashing
4. Press
and time
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
to the off position.
again and again until
starts to flash.
or
to set the hours and
then the minutes for END time. Press
to confirm.
and time setting flash
door to stop the acoustic signal.
to the off position.
again and again until
starts to flash.
or
to set the minutes and
then the hours for DURATION time.
Press
to confirm.
or
to set the hours and
then the minutes for END time. Press
to confirm.
ENGLISH
11
.
Advertisement
Table of Contents
