Download Print this page

Advertisement

Quick Links

640-231X V MAIN DRAIN OWNER'S MANUAL
For Part Numbers: 640-2310 • 640-2311 • 640-2312 • 640-2317 • 640-2319-DKG • 640-2319-BEI • 640-2319-DKB
VGBA
2017
Read and follow all instructions in this owner's manual and on the equipment. Failure to follow instructions can cause
severe injury and/or death.
SOFA INSTRUCTIONS
When installing and using this equipment, basic safety precautions shall always be followed, including the following: IMPORTANT
SAFETY INSTRUCTIONS. READ, FOLLOW, AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS.
Any modification that increases the flow rate of the circulation system shall require re-evaluation of the cover/grate and sump to
ensure that the flow rating of the Suction Outlet Fitting Assembly (SOFA) is not exceeded.
Missing, broken, or cracked cover/grates, sumps, mud-frames, or any other SOFA component shall be replaced before bathers are
allowed to use the pool.
Loose cover/grates shall be reattached before bathers are allowed to use the pool.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
WARNING - SUCTION ENTRAPMENT HAZARD
Suction in suction outlets and/or suction outlet
covers which are damaged, broken, cracked,
missing, or unsecured can cause severe injury and/
or death due to the following entrapment hazards:
Hair Entrapment: Hair can become entangled in suction outlet cover.
Limb Entrapment: A limb inserted into an opening of a suction outlet
sump or suction outlet cover that is damaged, broken, cracked, missing,
or not securely attached can result in a mechanical bind or swelling of
the limb.
Designed,
Engineered &
Manufactured
in the USA.
©2021 Waterway Plastics
WARNING:
IMPORTANT SAFETY INSTRUCTIONS. READ, UNDERSTAND, AND FOLLOW ALL WARNINGS
AND INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
USE ONLY GENUINE WATERWAY REPLACEMENT PARTS.
2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
www.waterwayplastics.com • waterway@waterwayplastics.com
Body Suction Entrapment: A negative pressure applied to a large
portion of the body or limbs can result in an entrapment.
Evisceration / Disembowelment Entrapment: A negative pressure
applied directly to the intestines through an unprotected suction
outlet sump or suction outlet cover which is damaged, broken, cracked,
missing, or unsecured can result in evisceration / disembowelment
entrapment.
Mechanical Entrapment: There is potential for jewelry, swimsuit,
hair decorations, finger, toe, or knuckle to be caught in an opening of a
suction outlet cover resulting in mechanical entrapment.
810-0046.0121

Advertisement

loading
Need help?

Need help?

Do you have a question about the 640-231 V Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Waterway 640-231 V Series

  • Page 1 USE ONLY GENUINE WATERWAY REPLACEMENT PARTS. Designed, Engineered & Manufactured in the USA.
  • Page 2 TO REDUCE THE RISK OF ENTRAPMENT HAZARDS: • A minimum of two functioning suction completely blocked, the remaining suction outlets serving the outlets per pump must be installed. system shall have a flow rating capable of the full flow of the Suction outlets in the same plane pump(s).
  • Page 3 • Do not exceed the safe flow rating of SOFAs as listed. • All SOFAs should be installed in accordance with Waterway installation instructions. • No modification shall be made to SOFA structure or flow path unless new configuration has been certified as a new SOFA.
  • Page 4 819-00801 642-215x V 642-214x 640-2310 V 819-00801 642-215x V SG642-214x SG6402310...
  • Page 5 INSTRUCTIONS FOR CONCRETE MAIN DRAINS SUMP (DUAL PORT) 819-00801 642-215x V 715-9910 672-2510 GRATED ANTI-VORTEX CONCRETE ASSEMBLY 1. Align cover holes with brass inserts. 2. Hand-tighten supplied screws. DO NOT USE POWER TOOLS. 3. A minimum 2" connecting pipe should be used.
  • Page 6 INSTRUCTIONS FOR CONCRETE MAIN DRAINS WITH ADJUSTABLE COLLAR SUMP (DUAL PORT) 819-00801 642-215x V 642-2240 715-9910 672-2550 GRATED ANTI-VORTEX CONCRETE ASSEMBLY 1. Align cover holes with brass inserts. 2. Hand-tighten supplied screws. DO NOT USE POWER TOOLS. 3. A minimum 2" connecting pipe should be used.
  • Page 7 INSTRUCTIONS FOR VINYL LINER MAIN DRAINS (DUAL PORT) Anti-Vortex Screw (2) Plate 819-00801 • Grated Anti-Vortex Cover is contoured to keep auto-cleaners from sticking • Vinyl liner mounting plate is angled for auto-cleaners to climb over • Body is type 1 PVC: better for glue joints 642-215x V Screw (8) Brass...
  • Page 8 INSTRUCTIONS FOR CONCRETE MAIN DRAINS WITH DEEP SUMP (DUAL PORT) 819-00801 642-215x V 715-9930 672-2610 GRATED ANTI-VORTEX CONCRETE ASSEMBLY 1. Align cover holes with brass inserts. 2. Hand-tighten supplied screws. DO NOT USE POWER TOOLS. 3. A minimum 2" connecting pipe should be used.
  • Page 9 INSTRUCTIONS FOR CONCRETE MAIN DRAINS WITH ADJUSTABLE COLLAR DEEP SUMP (DUAL PORT) 819-00801 642-215x V 642-2240 715-9930 672-2650 GRATED ANTI-VORTEX CONCRETE ASSEMBLY 1. Align cover holes with brass inserts. 2. Hand-tighten supplied screws. DO NOT USE POWER TOOLS. 3. A minimum 2" connecting pipe should be used.
  • Page 10 FIELD BUILT DEEP SUMP WITH 2.5" PIPE FLOW PATH (2.5" DEEP SUMP) 642-2150 V MUD RING PART NO. 642-2090 4" FLOW PATH FINISH SURFACE OF THE POOL FINISH SURFACE OF THE POOL 4" FLOW PATH 6.5" 3.5" 7.5" 8" FLOW PATH 2.5"...