Summary of Contents for Furniture of America YNJ-2174C41
Page 1
MODEL # YNJ-2174C41 Questions? GIVE US A CALL: 1-888-980-5122 MON-FRI 8:30AM-5:30PM (PST) TOOLS REQUIRED Phillips Screwdriver (Not Included) Hammer (Not Included) 2 - People Recommended ASSEMBLY RATING EASY DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
ASSEMBLY CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Position each part correctly Turn clockwise to tighten and and insert screws or bolts into only tighten when step is their respective holes. completed or when instructed to do so.
GET READY Please group boards as below. 2PCS Body 2PCS Doors 7 / 16...
Page 8
Hardware x8PCS Hardware x2PCS Hardware x2SETS Hardware x2PCS Hardware x4PCS Hardware x2PCS Hardware x2PCS magnet Accessory x1PC magnet Attach magnet to panel (#A) by using screws (#9). Make sure magnet (#8) is facing the direction of the arrow. OPTIONAL Apply a dab of glue into dowel holes of panels before inserting dowels (#3).
Page 9
Hardware x8PCS Accessory x1PC OPTIONAL Apply a dab of glue into dowel holes of panels before inserting dowels (#3). 9 / 16...
Page 10
Part x1PC Part x1PC Part x1PC Hardware x4PCS Front Part x1PC Front Part x1PC Hardware x4PCS 10 / 16...
Page 11
Part x1PC Part x1PC Part x1PC Front Part x1PC Hardware x8PCS Accessory x6PCS Accessory x1PC RECOMMEND Recommend using a power tool to only tighten hardware (#5) faster. Accessory (#A2) could also work for hardware (#5) if a power tool is not present. 11 / 16...
Page 12
Part x1PC Part x2PCS Part x1PC Hardware x8PCS Front Please refer to page 5 for detailed instructions on how to fasten cam locks (#2) to cam bolts (#1). 12 / 16...
Page 13
Part x1PC Front Part x1PC Part x1PC Hardware x12PCS Insert shelf pins (#7) to the holes of the desired shelf height. Part x2PCS Front Insert the side with fixed door pin (#6) first before inserting spring assisted door pin (#6). 13 / 16...
Page 14
Hardware x8PCS Hardware x8PCS Front Insert fixative plates (#12) through the thin lined gaps between back and side panels, then secure by using screws (#13). [ No pre-drilled holes ] Accessory x1PC Accessory x1PC Accessory x1SET Front For safety, please secure unit onto wall by using wall mounted straps provided.
Page 15
ASSEMBLY COMPLETED Please ensure the furniture rests on an even and flat surface. If the produst wobbles or feels loose,double-check all bolts and/or screws are properly tightened and secured. Keep this handy! Please retain this instruction manual and any order-related information for future reference.