D-Link DWM-312W Quick Installation Manual page 28

4g lte wireless m2m router with one module for two sim cards

Hide thumbs Also See for DWM-312W:

Table of Contents

DWM-312W

Configuring Wired WAN Connection

This configuration step is available for the Wired connection and Wi-Fi

connection methods.

You should configure your WAN connection in accordance with data

provided by your Internet service provider (ISP). Make sure that you have

obtained all necessary information prior to configuring your connection.

Otherwise contact your ISP.

1. On the Internet connection type page, click the SCAN button

(available for the Wired connection method only) to automatically

specify the connection type used by your ISP or manually select the

needed value from the Connection type list.

Static IPv4: Fill in the following fields: IP address, Subnet mask,

Gateway IP address, and DNS IP address.

Static IPv6: Fill in the following fields: IP address, Prefix, Gateway IP

address, and DNS IP address.

Quick Installation Guide

Table of Contents