Explanation Of The Parameters - Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.2 Explanation of the parameters

4.2 Explanation of the parameters
Diagnostics no supply voltage L+
Enabling of the diagnostics for no or insufficient supply voltage L+.
Diagnostics short-circuit to ground
Enabling of the diagnostics if a short-circuit of the actuator supply to ground occurs.
Diagnostics short-circuit to L+
Enabling of the diagnostics if a short-circuit of the actuator supply to L+ occurs.
Diagnostics wire break
Enabling of the diagnostics if the line to the actuator is broken.
Operating mode
Determines whether a channel is enabled or disabled.
Reaction to CPU STOP / substitute value
Specifies the behavior of the module if the CPU changes to STOP.
Potential group
Specifies that a BaseUnit with voltage supply feed-in is located in this slot
(see system manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293)).
14
Digital output module DQ 8x24VDC/0.5A ST (6ES7132-6BF00-0BA0)
Manual, 07/2014, A5E03574575-AC