Table of Contents
Advertisement
TAPE REMOVAL METHOD AT NO POWER SUPPLY
1.
Remove the DVD/VCR block from the main unit and the Fig. 1 below can be seen.
(Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2.
Remove one screw of the Loading Motor from the insert hole for screw driver and remove the Loading
Motor.
3.
Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
(Refer to Fig. 2)
4.
Rotate the Clutch Ass'y either of the directions to wind the Video Tape in the Cassette Case.
5.
Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to
scratch on the tape.
Insert hole for screw driver
Fig. 1
DISC REMOVAL METHOD AT NO POWER SUPPLY
1.
Remove the Top Cabinet and Front Cabinet. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2.
Rotate the black gear of Deck CD section in the direction of the arrow by hand, remove the disc from
Deck CD. (Refer to Fig. 3)
PARENTAL CONTROL - RATING LEVEL
If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below.
1.
Turn Unit ON.
2.
Confirm that no disc on the disc tray.
3.
Press and hold the '7' key on the remote control unit.
4.
Simultaneously press and hold the 'STOP' key on the front panel.
5.
Hold both keys for more than 3 seconds.
6.
The On Screen Display message 'INITIALIZED' will appear.
7.
The 4 digit password has now been cleared.
NB: The above procedure will reset ALL of the player's settings to the default factory state.
Pinch Roller Cam
Gear (Black)
Fig. 3
4 DIGIT PASSWORD CANCELLATION
A1-5
Loading Motor
Screw
Main Cam
Main Chassis (Front Side)
Fig. 2
Deck CD
Capstan DD Unit
Clutch Ass'y
Advertisement
Table of Contents
