Tape Removal Method At No Power Supply - Toshiba MV19N2 Service Manual

TAPE REMOVAL METHOD AT NO POWER SUPPLY

1. Remove the VCR block from the main unit.
(Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
Remove the screw 1 of the Deck Chassis and remove the Loading Motor.
2.
3. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
4. Rotate the Clutch Ass'y either of the derections to wind the Video Tape in the Cassette Case.
5. Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to
scratch on the tape.
Loading Motor
Screw 1
Pinch Roller Cam
Main Cam
Main Chassis (Front Side)
A1-2
Capstan DD Unit
Clutch Ass'y