GOM ARAMIS User Manual Hardware page 23

Set Up Sensor
0000001503_002_EN_02-12-2019
Procedure:
1. Loosen the large handle.
The cameras can be moved in radial direction in a limited way.
Fig. 7: Loosening the large handle of the camera slider
2. Loosen the small handle. The cameras can be moved in all directions.
Fig. 8: Loosening the small handle of the camera slider
NOTICE
Both handles of the camera fixture are loosened completely.
The camera bends downwards with the fixture. Thus, there is a tensile
load in the cabling.
▶
Hold the camera, including the fixture, with one hand.
3. Move the cameras to the required slider distance.
Info
Loosen the cable clamping in the middle of the camera support before
moving the sliders.
Page 23 (56)