Table of Contents
Advertisement
1.1 Operating Elements
Power button Function
ON / OFF
Reset
Stand by
1.2 Handling
Never touch the area of the antennae [Fig. I] with your hand or cover with other objects.
This can interfere with the data transmission or shorten the battery life.
Position the
iQ 50
on the wheel as shown in [Fig. II].
Note
Always position the
sensor. Never hold against the wheel rim – that impairs the transmission power.
1.3 Touchscreen
Warning
In order to avoid damage to the touchscreen, do not touch with pointed objects or apply too much pressure.
2SHUDWH WKH WRXFKVFUHHQ RQO\ ZLWK \RXU ÀQJHUV
f
Do not bring the touchscreen into contact with other electrical devices. Electrostatic discharges can lead to mal-
functions of the touchscreen.
f
Ensure that the touchscreen does not come into contact with water. The touchscreen may malfunction in a damp
atmosphere or on contact with water.
f
If the touchscreen remains switched on for prolonged periods without being used, images may burn into the
screen. Switch off the touchscreen when the device is not being used.
f
Swiping movements and other gestures are not supported by the
14
1. iQ 50 -
(Programming and Diagnostic Tool)
Behaviour
Press and hold
Press and hold for longer than 10 seconds.
Device is restarted if there was a malfunction.
3UHVV EULHÁ\
Switch display ON and OFF.
iQ 50
on the sensor so that the transmit/receive antenna is facing towards the wheel
iQ 50
hand-held terminal.
Advertisement
Table of Contents
