Record Function - DigitalWay MPIO FD100 User Manual

FD100-Eng-USA1 1/8/97 11:19 PM
[Power Menu (FM) Setup]
1. Enter the Power Menu, by pressing the Joy Stick Key for long.
2. Select a menu which to be changed by shifting the Joy Stick Key
right and left and press the Joy Stick Key.
3. Change the setup by shifting the Joy Stick Key (upward & downward)
and save the setup status by pressing the Joy Stick Key.
4. Press the F button and move to the upper item.
Ex) Change the Setup Status of the SEEK STEP Menu
1. Enter the Power Menu by
pressing the Joy Stick Key for
long and Select the SEEK
STEP Menu by shifting the Joy
Stick Key.
3. Move to the 50KHz Item by shifting the Joy Stick Key.
4. Save the setup status by pressing the Joy Stick Key in the 50KHz
Item.
5. Press the F button and move to the FM Mode.
28
English
Page 28
2. Enter the SEEK STEP Menu by
pressing the Joy Stick Key.

4. Record Function

TIP
A file created from the record function of FD100, will be stored in the MPIO
RECORD Folder which the MPIO reserved.
* The record file is stored at the bit rate of 33Kbps.
* In case the recording time is less than 5 sec., record file is not produced.
1. Voice Record
1) If you press the REC button in 2) If you want to complete the voice
the pause state of Playback
Mode, it starts to record voice.
3) The voice record files are stored in
2. FM Record
1) In case pressing the REC but-
ton while receiving FM, it
starts to record FM.
TIP
- The MPIO RECORD folder is reserved by MPIO. Please pay attention not to
use name of MPIO RECORD Folder.
- The record file is saved in the internal memory. Make sure the file is not pro-
duced in the Memory Card.
record, press the REC button
again.
the MPIO RECORD folder by the
file name of VOICE001.WAV,
VOICE002.WAV etc..
2) If you want to stop the FM
Record, press the REC button
again.
3) The FM record files are stored
in the MPIO RECORD folder by
the file name of FM001.WAV,
FM002.WAV etc.
29
English