Page 3
Listening to Music Step 1. Driver Installation It isn’t needed to install driver with windows me/2000/XP. The software should be installed before connect player and computer. 1. Insert the Install CD into the CD-ROM driver. : The Install Menu Screen will display automatically. 2.
Page 4
Selecting the previous/next track & Forward/Rewind function In case of pause status: If you push the stick button to right or left, player plays the next track or previous track. In case of during playback: If you push the stick button to right or left, player performs the forward or rewind function. Volume control Turn the Wheel key to down or up (Volume Level: 0 ~30).
Page 5
2. Press the REC button again at the end point. 3. If you want to cancel this function, press the REC button again. Menu Structure for Playback Mode Mode Select the Main Mode. 1. Playback 2. Recording 3. FM Tuner Select the EQ by music genre 1.
Page 6
Language Select the language to display file Information (or ID3 Tag) on the display device. A: Afrikaans, Albania, Arabic, Azeri B: Basque, Byelorussian, Bulgrian C: Catalan, Chinese(Simple), Chinese(Trandition), Croatian, Czech D: Danish, Dutch E: English, Estonian F: Faeroese, Farsi, Finnish, French G: Galician, German, Greek H: Hebrew, Hungarian I: Icelandic, Indonesian, Italian...
Page 7
2. Resume Remembers and plays the part played right before the power was turned off. 1. Initial 2. Stopped 3. Sleep You can power off the device at the reserved time. 0(Default) ~ 60min 4. Auto Power Off Set the function of Auto Power off when no button is pressed for a certain time in the pause state.
Page 8
Listening to the FM Radio Move to FM Radio Mode 1. Move to Menu by pressing the stick button. And press the stick button again. 2. Select the FM Turner Mode, and press the stick button. When you press the FUNC button for long in playback mode, move to FM Radio Mode Channel Control 1.
Page 9
3. Select the station number that you want to save it by using the stick button, press the stick button. Tip Channel Mode & Station Mode Channel Mode: Search the Channel by using the stick button. Station Mode: Move between the Stations saved. ※...
Page 10
Auto Preset You can save up maximum 20 stations searched from the Frequency Range in disregard of the existing Station. 1. No 2. Yes Seek Step Select the unit of frequency switch in the Channel Search Mode using the stick button. 1.
Page 11
Recording Voice Recording 1. Move to menu by pressing the stick button. And press the stick button again. 2. Select the recording mode. Press the stick button in recording Mode. 3. Press the REC button for long. 4. If you want to pause, press the REC button. If you want to keep record, press it again.
Page 12
3. Move to menu in recording mode by pressing the stick button. 4. Select the direct encoding in REC OPT menu by pressing the stick button. 5. Play the audio source. Volume of Encoding file is affected the audio source. 6.
Page 13
Voice 1. Quality Sets the quality of voice recording. Recording Sample Rate: 32kHz, 44.1kHz Bit Rate: In case of 32kHz: 48Kbps ~ 320Kbps In case of 44.1kHz: 48Kbps ~ 128Kbps 2. Record Gain Controls the recording level. 1. Low 2. Middle 3. High 3.
Page 14
2. Auto Power Off Set the function of Auto Power off when no button is pressed for a certain time in the pause state. 3(Default) ~ 30min 3. Fade When activated, volume increases gradually at playback to prevent sudden loudness. 1.
Page 15
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.