DigitalWay MPIO FD100 User Manual page 14

Mpio fd100: user guide
Table of Contents

Advertisement

FD100-Eng-USA1
1/8/97 11:19 PM
[Auto Preset Setup]
You can save channels searched from the Frequency Range in dis-
regard of the existing Station.
In areas of weak FM reception, you may not perceive the frequency.
1. Move to the Menu Mode by pressing the Joy Stick Key.
2. After select the Auto Preset Menu, check the
running status of Auto Preset.
3. If you want to execute the Auto Preset function,
select 'Yes' by using the Joy Stick Key.
-
In case of executing the Auto Preset function,
all Stations saved are deleted. So pay atten-
tion to this.
- Executing the Auto Preset, You can save up
maximum 20 stations.
3) Power Menu(FM) Setup
[Power Menu (FM)]
If you press the F button shortly in Menu, you will move to the upper
item.
Menu
Lower Item
* Refer to Page
[SAVE CHANNEL]
25
Select the Sound Mode while receiving FM.
[SOUND MODE]
1. MONO
2. STEREO
26
English
Page 26
Detail Information
- You can save the Channel (Frequency) while
receiving it.
- Display the storing status of the Station.
Set the Mono Mode while receiving FM.
Set the Stereo Mode while receiving FM.
Menu
Lower Item
Detail Information
[FM BAND]
Select the FM Frequency range.
1. US/EU/KR/CN Receiving Frequency Range of 87.5~108MHz.
2. JAPAN
Receiving Frequency Range of 76~92MHz.
3. WORLD WIDE Receiving Frequency Range of 76~108MHz.
[AUTO PRESET]
You can save up maximum 20 stations searched
from the Frequency Range in disregard of the
existing Station.
[SEEK STEP]
Select the unit of frequency switch in the Channel Search
Mode using Joy Stick Key.
1. 100KHz
Switch the FM Channel to the unit of 100KHz.
2. 50KHz
Switch the FM Channel to the unit of 50KHz.
Select the duration of Backlight when the button is pressed.
[BACKLIGHT]
1. DEFAULT
When the button is pressed, the Backlight
maintains for 3 sec.
2. USER
You can control the duration of Backlight at
the unit of 3 to 30 sec.
3. OFF
Not use the Backlight Function.
Reserve the time of Switch Off.
[SLEEP MODE]
1. OFF
Not use Sleep Mode.
2. USER
You can adjust the desired time of Auto Off
to 3 to 60 minutes while playing a file.
* The set point of Sleep Mode will be converted to OFF after the
power is turned off.
Display the Firmware Version, Internal
[INFORMATION]
Total/Free Memory, External Total/Free
Memory information.
27
English

Advertisement

Table of Contents
loading

Table of Contents