Advertisement
DECORATIVE FRUIT CAGE ASSEMBLY INSTRUCTIONS
Introduction
Thank you very much for purchasing this Harrod Horticultural Decorative Fruit Cage.
These instructions show the step by step assembly of a three unit cage which will help
demonstrate how to install your fruit cage, regardless of whether you have bought a
single, or a multiple unit cage.
Safety
T o install your cage safely we recommend that you enlist the help of three or more people. T ake extra
care when working on step ladders on soft ground.
Tools Required:
1 x soft mallet, 1 x 8mm spanner, 2 x 13mm spanners, 1 x 17mm spanner, 1 x tape measure,
1 x scissors,1 x ball of string, 1 x spirit level, 1 x hole former (ARC-021)
Parts Identifcation
Before constructing the fruit cage remove all protective packaging and check that all parts listed in
the pack contents list (CHK-809) are present. Use the part identifcation diagram on the opposite
page to help you recognise the parts. You will have varying quantities of fruit cage parts depending
on the number of units combined to make up your specifc arrangement. Each door kit, of which you
will have at least one, comprises of the parts listed in the table below left.
HEAVY-DUTY STEEL DOOR KIT
PARTS IDENTIFICATION (GDN105)
Part Description
Ref No.
1.
2 x 0.7m Horizontal Supports
2.
1 x Diagonal Support
3.
2 x 1.9m Vertical Supports
4.
1 x 2.3m Door Support Upright
STEEL DOOR ASSEMBLY PACK
PARTS IDENTIFICATION (GDN116)
Part Description
Ref No.
5.
4 x Two-Way Connector
6.
1 x T-Joint
7.
1 x Catch and Fixings
8.
2 x Hinge and Fixings
9.
2 x Hex Bolts M8 x 45mm
10.
4 x Plastic Washers M8
11.
2 x Nylock Nuts M8
12.
1 x Foot Plate Clamp
13.
1 x Foot Plate
Note: A 3mm allen key is provided
with GDN-809 for assembly of GDN-809
and GDN-808
PARTS IDENTIFICATION (GFC - 128/129)
Part No.
Ref No.
PGG117
14.
2.5m Horizontal Support
PGG007
15.
Three-Way Connector
PGG006
16.
Four-Way Connector
PGG112
17.
Five-Way Connector
18.
Square Connector Plate
19.
Long Connector Plate
20.
Corner Connector Plate
21.
Connection Node
Part No.
22.
Hex Bolt M10 x 20mm
GDN-676
23.
M10 Washer
PGG005
24.
Curved Roof Support
GDN-809
25.
Ground Peg
GDN-808
26.
Net Clip
GPP510
27.
Net Tie
GPP710
4.
2.3m Support Upright
GPP500
NA
2m Wide Standard Side Netting
GDN-108
NA
Fitted Roof Net
GDN-108
NA
Whipping Twine
NA
Whipping Needle
PAGE 3
(Optional).
DECORATIVE FRUIT CAGE
Part Description
Part No.
PGG035
GDN-675
GDN-679
GDN-678
PGG016
PGG021
PGG019
PGG008
BOL342
BOL712
PGG011
GPP001
GPP005
GAR914
PGG112
GAR070
GDN-072
TWN-294
TWN-295
Advertisement
