Electrical Safety Testing - Dyson DC 23 Service Manual

Electrical safety testing

Ensure that at all times during the repair and testing of products
that customers, pets, children and you are not exposed to any
Live electrical supply.
The following tests must be performed prior
to and upon completion of all repairs to
Dyson floorcare products and before any
functional checks. You must ensure that
a full visual inspection of the product is
completed prior to repair.
This is vital to avoid any possibility of
personal injury to the end user.
The Seaward Primetest 200 (or equivalent) should
be used to test the electrical insulation of a Class
11 appliance; it indicates any electrical leakage.
Insulation test points:
All variants
Test directly onto the motor through the
grille in the pre-filter housing.
Service manual
Motorhead variant
Test the two screws highlighted in
the upper chassis.
Test the front screw in the brushbar
motor cover lower.
Test the two screws in the stow neck
cover.
Test the two screws in the wand cuff
cover.
02