Siemens SITRANS LG250 Operating Instructions Manual page 43

Menu - Setup
Menu item
Lock adjustment
Measurement loop name
Units
Probe length
Type of medium
Application
Medium, dielectric constant
Superimposed gas phase
Dielectric constant, upper medium (TS)
Tube inner diameter
Max. adjustment - Level
Max. adjustment - Level
Min. adjustment - Level
Min. adjustment - Level
Accept adjustment of the level measurement?
Max. adjustment - Interface
Max. adjustment - Interface
Min. adjustment - Interface
Min. adjustment - Interface
Integration time - Level
Integration time - Interface
Linearisation type
Linearisation - Socket correction
Linearisation - Vessel height
AI FB1 Tag Descriptor
AI FB1 Channel
AI FB1 scaling PV Scale (min.)
AI FB1 scaling PV Scale (max.)
AI FB1 Lin. Type
AI FB1 Out Scale Unit
AI FB1 Out Scale Decimal Point
PBD-51041053
ment. Any created false signal suppression or user-programmable lin-
earization curve as well as the measured value memory are deleted.
The following table shows the default values of the instrument. De-
pending on the instrument version or application, all menu items may
not be available or some may be differently assigned:
SITRANS LG250 - Operating Instructions
Default value
Released
Sensor
Distance unit: order-specific
Temperature unit: order-specific
Länge der Messsonde factory setting
Liquid
Level in the vessel
Water-based, > 10
Yes
1.5
200 mm
100 %
Distance: 0.000 m(d) - Note dead zones
0 %
Distance: Probe length - Note dead zones
No
100 %
Distance: 0.000 m(d) - Note dead zones
0 %
Distance: Probe length - Note dead zones
0.0 s
0.0 s
Linear
0 mm
Probe length
Primary Value (lin. percent level)
0 %
100 %
Linear
%
#.##
43