Table of Contents
Advertisement
Quick Links
740B Clifty Drive • Madison, Indiana 47250 • 812-574-7777
Rocker Switch
Fairlead
Hardware
Read instructions and view illustrations before beginning.
Need help with your installation?
sales@superatv.com
1-812-574-7777
Thank You
© 2015 SuperATV.com
All Rights Reserved.
®
Winch
Baffle Ring
Clevis Hook
and Pin
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
For Choosing
OPERATING MANUAL
EWX4500A Winch
Solenoid
Wireless
Remote Control
Liability Statement
SuperATV's
conditions. Adding, modifying, or fabricating any factory or aftermarket parts will
void any warranty provided by SuperATV
products could interfere with other aftermarket accessories. If user has aftermarket
products on machine, contact SuperATV
Although SuperATV
that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product's ability to
protect user from severe injury or death. SuperATV
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV
occur, SuperATV
replacement parts, or freight charges. SuperATV
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV
®
problems with OEM housings, bearings, seals, or other manufacturers' products will
not be covered by SuperATV
item was not installed properly, misused, or modified.
Wiring
Mounting Plate
Control Box
Controls Splitter Hand Strap
products are designed to best fit user's ATV/UTV under stock
®
and is not recommended. SuperATV's
®
to verify that they will work together.
®
has thousands of satisfied customers, user should be aware
®
products, user agrees that should damages
®
will not be held responsible for loss of time, use, labor fees,
®
, nor any 3rd party, will not be held
®
will warranty only parts provided by SuperATV
. SuperATV
parts and products are not warrantied if
®
®
®
urges operators and occupants
®
. The total liability of seller to
®
. Any damage or
®
Rev EWX4500A 10/19/2015
Advertisement
Table of Contents
Related Manuals for SuperATV EWX4500A
Summary of Contents for SuperATV EWX4500A
- Page 1 No warranty or representation is made as to this product’s ability to 8:00am - 9:00pm EST M-Th protect user from severe injury or death. SuperATV urges operators and occupants ®...
- Page 2 Indicates a potentially hazardous situation, which if not avoided, CAUTION may result in minor or moderate injury. This symbol is also used to alert user against unsafe practices. Indicates a potentially hazardous situation, which if not avoided, WARNING may result in death or serious injury. EWX4500A...
-
Page 3: Getting To Know Your Winch
Fairlead mounting holes included. Pulley/Snatch Block (not included): Doubles pulling power of Winch or changes pulling direction without damaging Synthetic Rope. When pulling over 70% of rated line pull, it is recommended to use double line and snatch block. EWX4500A... -
Page 4: Winch Assembly And Mounting
Gear Housing are properly aligned. Proper alignment allows for even distribution of full rated loads. Universal mounting plate shown. Machine specific mounting plates are available at www.SuperATV.com 1. Install supplied Fairlead to supplied Mounting Plate with (2) each M8 x 20mm Lg. HHCS, M8 Flat Washers, M8 Lock Washers, and M8 Nuts. - Page 5 WINCH ASSEMBLY AND MOUNTING (continued): Baffle Ring remove Lock (tap with a hammer) install onto Synthetic Rope and replace Lock Hand Strap EWX4500A...
- Page 6 Controls Splitter Winch Connect to Winch To Winch NEG, “-” To Battery POS, “+” Winch Key On Power To Winch POS, “+” 12V Switched Wire Solenoid To Battery NEG, “-” Connect to a switched 12V source; (Ignition Key) Make connection EWX4500A...
-
Page 7: Safety Precautions
Synthetic Rope breakage. WARNING - Avoid “shock loads” by using control switch intermittently to take up slack in Synthetic Rope. “Shock loads” can exceed rated capacity for Synthetic Rope and Winch Drum. (Safety Precautions continue on following page) EWX4500A... -
Page 8: Hand Strap
Drum by hand with Clutch disengaged. Keep hands clear of Fairlead and Winch Drum while Winch is under power. Rope Exiting From Under Side cutaway view of Winch Drum Side Cutaway View Of Winch (Safety Precautions continue on following page) EWX4500A... -
Page 9: General Tips For Safe Operation
• Never connect Synthetic Rope back onto itself. Always use a snatch block, sling, or chain of suitable strength. • Pull only on parts of vehicle as specified by vehicle manufacturer. • Use only attachments and/or adapters supplied by manufacturer. • Test run Winch in (2) directions before winching. EWX4500A... -
Page 10: Rigging Techniques
Winch Winch To absorb energy in event of Synthetic Rope failure, place a blanket or jacket over Synthetic Rope approximately 5ft - 6ft from Clevis Hook before pulling a heavy load. Open vehicle hood for more protection. EWX4500A... - Page 11 18. Set Free Spooling Clutch to “CLUTCH IN” position and rewind Synthetic Rope. Keep hands clear of Winch Drum and components. Any material already on Winch Drum should be spooled tightly and neatly. Draw out and re-spool if necessary. 19. Secure Hook Strap and Clevis Hook. EWX4500A...
-
Page 12: Troubleshooting
Motor runs but Free Spooling Clutch not Set Free Spooling Clutch to “CLUTCH IN” position. If Winch Drum does engaged. problem persist, contact SuperATV. not turn. Battery is weak and may need charging. Always Motor runs slowly operate Winch with vehicle running. -
Page 13: Maintenance
Current A lbs (kgs) 12V DC 24V DC 12V DC 24V DC 11.6 (3.6) 12.5 (3.8) 1500 (680) 9.2 (2.8) 10.5 (3.2) 2500 (1134) 7.8 (2.4) 8.5 (2.6) 3500 (1588) 6.6 (2.0) 7.2 (2.2) 4500 (2041) 4.9 (1.5) 5.9 (1.8) EWX4500A...
Need help?
Do you have a question about the EWX4500A and is the answer not in the manual?
Questions and answers