Automatic Steam Control
SETTING
1 setting
Laminate
Automatic Steam
Control
Hardwood
Marble
Tile
Stone
For an extra burst of steam, you can use the Steam Blaster feature. Follow the instructions
Steam Blaster
™
found on the "Using your Steam Pocket
TO SANITIZE* WITH THE STEAM MOP USING THE GENIUS
1
Attach a clean Dirt Grip pad to the Genius Mop Head.
2
Plug the unit in and press the Steam Button on the mop body to activate.
3
Wait 30 seconds for the unit to begin producing steam.
4
Start mopping on an appropriate sealed hard-floor surface with a forward and backward motion. After three minutes,
your unit is ready to be used to sanitize.
5
Using a forward and backward motion, move the unit slowly and evenly over the area you seek to sanitize while
applying continuous downward pressure. Slowly repeat at least 3 times.
* Sanitization studies were conducted under controlled test conditions. Household conditions and results may vary.
Genius Mop Head only when used with Steam Mop. Not in Steam Blaster
IDEAL FOR THESE SEALED
SURFACES
RECOMMENDED USAGE
Cleaning sealed surfaces and large areas
Basic, everyday cleaning
Removing spots and smaller messes
Cleaning moderate and heavy traffic areas
Mop" page.
®
MOP HEAD AND THE DIRT GRIP
™
mode.
™
PAD:
™
sharkclean.com
8