Advertisement
3.
Install the rear light assembly using 2 small bolts
and nuts.
3
Connecting the Lights
Parts needed for this procedure:
2
Cable tie
Procedure
1.
Connect the wire harness to the front light and
secure with a cable tie
Figure 4
Figure 5
g379044
2.
Remove the rear cover and route the rear
harness under the rear screen. Use the
magnetic wiring harness mount to keep the
wiring away from the operator and rear screen.
3.
Connect the rear light to the harness and secure
with a cable tie.
g379045
4.
Install the rear cover.
3
Figure 6
Figure 7
g379175
g379177
Advertisement
