Related Manuals for Doka 582778000
Summary of Contents for Doka 582778000
- Page 1 Original Operating Instructions 03/2011 Please retain for future reference en-GB 999260002 Shifting carriage TG Art.n° 582778000 2003 models onward The Formwork Experts...
- Page 2 Doka load-bearing towers Aluxo, Staxo and d2. to use it, and who are familiar with all applicable oper- ating manuals and regulations.
- Page 3 Important points to remember when wheel- Using both Shifting carriages TG, evenly lower the ing load-bearing towers: load-bearing tower to the desired height. Only use with Doka Aluxo, Staxo and d2 load-bearing towers. Travelling the tower without an Ground clearance of the frame feet max.
- Page 4 Original Operating Instructions Shifting carriage TG Moving the unloaded shifting carriage: Maintenance Be particularly careful when wheeling the Change the hydraulic oil unloaded shifting carriage backwards - it can easily topple over! after every 1000 operating hours at least 1x a year Lifting and lowering (with/without The hydraulic system is filled with a special low-temper- load)
- Page 5 Original Operating Instructions Shifting carriage TG The load is not being raised to the maximum height Possible causes: Not enough hydraulic oil The load can only be "pumped upwards" with great difficulty Possible causes: The releasing pin is stuck in the control valve (in the rubber knob or in the valve housing) The valve control system is faulty (low-pressure- valve core)
- Page 6 A-3300 Amstetten Doka Industrie GmbH Amstetten, 03.03.2011 Josef Umdasch Platz 1 A-3300 Amstetten Johann Peneder, Authorised Ludwig Pekarek, Officer, Head of Product and Executive Manager Service Development © by Doka Industrie GmbH, A-3300 Amstetten 999260002 - 03/2011 The Formwork Experts...
Need help?
Do you have a question about the 582778000 and is the answer not in the manual?
Questions and answers