Cleaning Instructions; Status Indicator Table - Motorola LM100 User Manual

Additional Information

Cleaning Instructions

Clean the external surfaces of the handset with a damp cloth, using a
mild solution of dishwashing detergent and water. Some household
cleaners may contain chemicals which could seriously damage the
housing. Avoid the use of any petroleum-based solvent cleaners.
Also, avoid applying liquids directly on the unit.

Status Indicator Table

There are three status indicators to the left of the display which
visually tell you the different states of your unit. The top indica-
tor is red, the middle indicator is yellow, and the bottom is green.
Below is a description of these indicators.
Status Indicator
Solid Green
Blinking Green
Solid Yellow
Blinking Yellow
Solid Red
Blinking Red
The area within which your unit operates is defined by
your service provider. Since this is a radio system, no
exact boundaries (as on a map) can be drawn. The
red status indicator (No Service) lights solid if you are
beyond range of a service area. There may be locations
within your area, such as tunnels and underground
parking facilities, where the unit may act as if it were
beyond range.
16
USER'S GUIDE
Illuminates While:
Talking/Transmitting
In Service
Reserved for Future Use
Reserved for Future Use
No Service
Registering on a Network
LM100/m100