Safety Information - Siemens Mobilett Plus Installation Instructions Manual

1 - 2

Safety information

CAUTION
Mobilett Plus/ E/ M/ HP
Service
Be sure to unplug the unit from the mains or turn off
the main circuit breaker before performing any service.
Remove or install boards only when the generator is
switched OFF. Adhere to the ESD guidelines.
Checks and adjustments performed with radiation ON
are identified by the radiation warning symbol
During these types of adjustments, radiation protective
clothing must be worn.
Observe all MOBILETT safety guidelines.
SPR8-220.031.02
Rev. 02
Page 2 of 2
11.02 SPS-UD
Prerequisites
.
Siemens-Elema AB
Solna, Sweden
1