Important Warning - Robot Coupe Mini MP 170 V.V. Manual

WARNING
: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse
of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to
know your appliance and enable you to use the equipment correctly. Please read these instructions in their entirety and make sure that
anyone else who may use the appliance also reads them beforehand.
• WARNING - some of the tools are very sharp e.g.
blades, etc..
• We recommend that you install your appliance on
its wall frame.
• Always check that your mains supply corresponds
to that indicated on the identification plate on the
motor unit and that it can withstand the amperage.
• Never plug your appliance into the mains supply
before placing it inside the preparation bowl.
• Always take care when handling the blades, as
they are extremely sharp.
ASSEMBLY PROCEDURES
• Follow the various assembly procedures carefully
(see page 7) and make sure that all the attach-
ments are correctly positioned.

IMPORTANT WARNING

UNPACKING
• Never try to override the safety systems
• Never insert an object into the preparation.
• Never switch the appliance on unless it has been
placed in the preparation bowl.
INSTALLATION
• Before dismantling the foot, bell or whisk always
check that the power mixer is unplugged.
• We recommend that you tilt the appliance at
a slight angle to prevent the bell from touching the
bottom of the container.
CONNECTION
Procedure to follow if the stick blender is accidentally
immersed during use.
1) Do not touch either the power mixer, the bowl or the
work surface.
2) Unplug the mixer's power cord from the wall socket.
3) Remove the power mixer from the preparation.
HANDLING
4) Tilt the power mixer to drain off as much liquid as
possible.
5) Do not switch the power mixer back on, as there is
still a risk of electrocution.
6) Send the power mixer to a Robot-Coupe approved
after-sales service to have the electrical components
cleaned and dried.
• As a precaution, always unplug your appliance
before cleaning it.
USE
W A R N I N G
CLEANING
W A R N I N G
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
• Always clean the appliance and its attachments at
the end of each cycle.
• Never immerse the motor unit in water.
• For parts made from aluminum, use cleaning
fluids intended for aluminum.
• For plastic parts , do not use detergents that are
too alkaline (e.g., containing too much caustic soda
or ammonia).
• Robot-Coupe can in no way be held responsible for
the user's failure to follow the basic rules of cleaning
and hygiene.
• Before opening the motor housing, it is absolutely
vital to unplug the appliance.
• Check the seals and washers regularly and ensu-
re that the safety devices are in good working order.
• It is particularly important to maintain and check
the attachments since certain ingredients contain
corrosive agents, e.g. citric acid.
• Never operate the appliance if the power cord
or plug has been damaged or if the appliance fails
to work properly or has been damaged in any way.
• Do not hesitate to contact your local Maintenance
Service if something appears to be wrong.
MAINTENANCE
5