Campania International Longitude FT-398 Assembly Instructions

Campania International Longitude FT-398 Assembly Instructions

Advertisement

Fountain Components

Item Description
Image
Longitude Fountain
- Water Feature
Longitude Fountain
- Basin

Fountain Information:

• This fountain holds approximately 7 gallons of water.
• This fountain uses a small fountain cover: FTNCOV-SM
• No refill device or submersible lights are suggested for this fountain.

Pump Information:

OEMPF320 - 320 GPH Pump (16 ft. cord length)

Tools Required:

Bubble Level
Screwdriver
Component
Quantity
Item #
FT-398A
1
FT-398B
1
FT-398 Longitude Fountain
Assembly Instructions

Pump Kit Parts List

Image
Component
(use adapter indicated)
#10 Stopper
20" length of 5/8" black non-kink tubing
1 1/2" length of 7/8" clear tubing
1 1/2" length of 3/4" CPVC
Hose Clamp
Proudly
MADE IN USA
Quantity
PK300
1
1
1
1
1
Wedges
2
1
rev 7/6/2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Longitude FT-398 and is the answer not in the manual?

Questions and answers

Summary of Contents for Campania International Longitude FT-398

  • Page 1 FT-398 Longitude Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 7 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: OEMPF320 - 320 GPH Pump (16 ft. cord length) Tools Required: Bubble Level Screwdriver...
  • Page 2 FT-398 Longitude Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - S eek Professional Help: Check if professional installation is recommended for your fountain.
  • Page 3 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - F ully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.

This manual is also suitable for:

LongitudeFt-398

Table of Contents