Simpson PowerShot Pro Series Use And Care Manual page 31

USING SIMPSON
Leaving water inside the pump during freezing weather will cause severe damage to the
pump. To avoid costly damage, always treat the pump with SIMPSON
remove the trapped water and to fill the pump with a lubricating, antifreeze solution.
SIMPSON Pump Guard (purchase separately) is formulated to protect your pump
®
from freezing damage while lubricating the internal seals. Pump Guard should be
used throughout the season to keep the seals pliable and well lubricated. Before
storing the unit for winter or for when there is a chance of freezing weather, use pump
guard to remove all traces of water from the internal cavities while filling them with an
antifreeze solution.
Simply use Pump Guard by following these easy steps:
1. Screw the Pump Guard adapter into the garden hose input on the pump.
2. Press and hold down on the button until the water and the Pump Guard comes out
of the high pressure port.
3. Unscrew the Pump Guard from the pump then prepare the pressure washer for
storage as outlined in STORAGE AND TRANSPORTATION.
Page 29
NOTICE
®
PUMP GUARD
PUMP DAMAGE
® Pump Guard to