Peavey BTS 2.2 - Bluetooth Speaker Manual

BTS 2.2 Speaker, USB charging cable, and 3.5 mm audio connector cable.

FUNCTION

1. 
   Volume Control
2. 
   Play/Pause
3. Press 3 sec to Power ON (blue LED light shown), Press 2 sec to Power OFF
4. 
   Forward & Backward
5. 3.5 mm AUX-in
6. 3.5 mm headphones
7. SD/TF
8. USB INPUT
9. MINI USB 5V
10. Bluetooth ON/OFF

Note: Bluetooth switch must be in the off position for use with SD card or uSB inputs.
Flashing blue light indicates discoverable mode and unit is able to be seen by other bluetooth devices.
TO CHARGE: Connect MINI USB/USB cable to computer or USB AC adapter. Red light illuminates while charging.

OPERATION

WIRELESS MODE:
Put mode switch (10) to Bluetooth "ON" mode.
Enable your Bluetooth device and select Device ID "TL78666".
If Bluetooth device is asking for a password, use "0000".
Speaker will "beep" when connected to Bluetooth device.

WIRED MODE:
Put mode switch (10) to Bluetooth "OFF" mode.
Connect audio source's output to the 3.5 mm audio jack, SD Card or USB input.
Unit will detect source and play in order of the files on the Card/Drive.

SPECIFICATIONS

When using electrical products, basic cautions should always be followed, including the following:

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
SAVE THESE INSTRUCTIONS!

INTERNAL RECHARGEABLE LITHIUM-ION BATTERY
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information.

DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery, you should follow the disposal instruction below:

The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated

• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance.
• Always confirm that the temperature is 5°C - 35°C (41° - 95° Fahrenheit). Before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded.
• Never expose the battery to any liquid.
• Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.
• Always keep the battery out of the reach of infants and small children.

PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY
Effective Date: 06/01/2012

What this Warranty covers
Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada.

What this Warranty Does not cover
The Warranty does not cover:

1. damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect;
2. damage occurring during shipment;
3. damage caused by repair or service performed by persons not authorized by Peavey;
4. products on which the serial number has been altered, defaced or removed;
5. products not purchased from an Authorized Peavey Dealer.

Who this Warranty Protects
This Warranty protects only the original purchaser of the product.

How Long this Warranty Lasts
The Warranty begins on the date of purchase by the original retail purchaser. The duration of the Warranty is 90 days.

What Peavey Will Do
We will repair or replace (at Peavey's discretion) products covered by Warranty at no charge for labor or materials. If the product or component must be shipped to Peavey for Warranty service, the consumer must pay initial shipping charges. If the repairs are covered by Warranty, Peavey will pay the return shipping charges.

How to Get Warranty Service

1. Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center.
   OR
2. Ship the defective item, prepaid, to Peavey Electronics Corporation, International Service Center, 412 Highway 11 & 80 East, Meridian, MS 39301. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of Warranty coverage. Also provide a complete return address.

Limitation of implied Warranties
ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.
Some states do not allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you.

Exclusions of Damages
PEAVEY'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT, AT PEAVEY'S OPTION. IF WE ELECT TO REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A RECONDITIONED UNIT. PEAVEY SHALL NOT BE LIABLE FOR DAMAGES BASED ON INCONVENIENCE, LOSS OF USE, LOST PROFITS, LOST SAVINGS, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
If you have any questions about this Warranty or services received or if you need assistance in locating an Authorized Service Center, please contact the Peavey International Service Center at (601) 483-5365.
Features and specifications are subject to change without notice.

FCC ID - ADXM-11BT
Fcc compliancy Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, that may cause undesired operation.

Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the user's authority to use the equipment.
NOTE - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures.

Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS • 39305 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com • 80305782 • ©2012