Nextech QC8055 Instruction Manual

6V Solar Panel to suit
Outdoor Trail Cameras
(QC8061/63)
Instruction Manual
QC8055
NOTICE
1. When using the product to supply power to trail cameras, we recommend to
also insert 8 type LR6 (AA) batteries to ensure that trail cameras always keep
working.
2. In order to ensure that the built-in battery charges and discharges most
efficiently, we recommend to charge city electricity fully to the battery in the
first use.
3. Do not use sharp objects to scratch the surface of solar panel.
4. When charging in the sun, please put the solar panel towards direct sunlight
to guarantee the best charging effect.
5. If the product stops working because of overload protection, please activate
it by charging via charger or solar power.
6. If the product works abnormally, please take out the digital devices firstly,
and then press the button approx. 10 seconds to reset.
7. When the battery has no enough power, it will stop working.
8. Thank you for purchasing our Solar Panel. This panel is compatible with our
trail cameras that feature an external power port.
9. If your Solar Panel does not seem to be functioning properly or if you are
having any issues, please check the FAQ / Troubleshooting section.
CAUTION
1. Before using the product, please ensure that output voltage (gently press the
button to display) and working voltage of the digital devices are same.
Otherwise, the devices can be damaged, or a fire can be caused.
2. The product does not apply to the digital devices with less that 0.1MA
working current.
3. When installing, please put the output interface downwards and seal with
silicone stopper. The angle between the panel and ground must not be less
than 30° to avoid water inflow and damaging the product.
SPARE PARTS AND FRAMEWORK
1 2 3
Solar panel Output cables
1 4
Instruction Manual
2 Wall mount
5
Micro USB cable
3
Solar panel
Button
25 50 75 100
% % % %
Power output Micro USB
interface charging interface
1/4" nut interface
4 5
25% LED indicator
50% LED indicator
75% LED indicator
100% LED indicator