Related Manuals for Otto Wilde GRILL STAND
Summary of Contents for Otto Wilde GRILL STAND
- Page 1 OTTO’S GRILL STAND ASSEMBLY INSTRUCTIONS Grill stand and storage space for The Otto Grill...
-
Page 2: Welcome To The Family
WELCOME TO THE FAMILY... - Page 3 THE OTTO GRILL STAND Congratulations on your purchase of Otto Wilde’s Storage Module and thank you for becoming a part of the grill revolution. With our Storage Module the name says it all. They are the perfect option for storing all of your grilling and outdoor accessories.
-
Page 4: Scope Of Delivery
SCOPE OF DELIVERY CORE Here is a list of parts that are exemplary for your S24. Quickly check that all the pieces are there and use the screws supplied. 32x M5 X 12 Screw 16x M6 X 16 Schraube 4x M5 X 10 Screw 4x Module Connector Screw 1x Base 1x Back 1x Side Wall Right... - Page 5 PLEASE ONLY USE THE MARKED SCREWS. 1x Cross Brace 4x Adjustable Castor 1x Rubber Protect Ring 1x Cross Brace Top 1x Base Closure 1x Counter Top 1x Toeboard Left 1x Toeboard Right 1x Gas Bottle Basket 1x Toeboard Front 1x Toeboard Back...
- Page 6 ASSEMBLY CORE A 2 x If you want to install drawers in your module, we recom- mend you install the rails before this step. A 5 x...
- Page 7 A 5 x...
- Page 8 A 4 x...
- Page 9 ASSEMBLY CROSS BRACES A 2 x...
- Page 10 A 4 x...
- Page 11 ASSEMBLY CASTORS Be sure to place the washers on the screws as shown here in order to ensure proper fas- tening of the castors. C 16 x For mobile use use these mounting holes (1) and for stationary installation these mounting holes (2).
- Page 12 ASSEMBLY FLOOR A 4 x...
-
Page 13: Installation
INSTALLATION... - Page 14 A 2 x...
- Page 15 ASSEMBLY TOEBOARDS Move your Storage Module into position and be sure to positi- on the caster with the wheel pointing to the center of the Module before lowering the foot and attaching the toeboard.
- Page 16 D 4 x A 4 x...
- Page 17 ASSEMBLY DRAWERS & DOORS ASSEMBLY INSTRUCTIONS DRAWER PAGE 18 ASSEMBLY INSTRUCTIONS DOOR PAGE 22...
-
Page 18: Scope Of Delivery
Phillips screws. 17x Screw M4 X 8* 1x Drawer Body 16 " TOOLS YOU WILL NEED Torx TX20* 1x Drawer Front 16 " 2x Drawer Slide Torx TX20* GRILL STAND WITH 4 DRAWERS Repeat the following steps for all 4 drawers. - Page 19 ASSEMBLY DRAWER B 6 x...
- Page 20 B 8x Snap the soft-close mechanism of the rail forward to tighten the rear two screws.
- Page 21 INSTALLATION DRAWER...
- Page 22 SCOPE OF DELIVERY DOOR Here is a list of accessories for the 16 " drawer. Quickly check that all the parts are there and use the screws * It is possible that supplied. some deliveries are made with Phillips screws. 12x Screw M4 X 10* TOOLS YOU WILL NEED...
- Page 23 ASSEMBLY DOOR Be sure to break out the cover on the side of the door that corresponds to the opening direction.
- Page 24 H 12 x...
- Page 25 INSTALLATION DOOR...
- Page 26 Scan or click on the QR code to get to the other assembly instructions of our Platform Modules. Otto Wilde Grillers GmbH Benzenbergstr. 44 Share your grill experience with us! 40219 Düsseldorf +49 (0) 211 542 130 30 service@ottowilde.de www.ottowildegrillers.com...
Need help?
Do you have a question about the GRILL STAND and is the answer not in the manual?
Questions and answers