Download Print this page

Rem Air System 4 Valve replacement pump Instruction Manual

Wireless remote control air pump

Wireless Remote Control Air Pump Instruction Manual

Congratulations, and thank you for purchasing the leading replacement air

system for luxury air mattresses. We know you will be pleased with the

quality and performance of your investment. Your new REM Air System

boasts the newest in remote sensor and whisper technology. In addition

you will also be happy with the simplistic setup and user friendliness.

Technical Speciﬁcations:

Model: REM Air System 4 Valve replacement pump

Voltage: DC12V

Pressure: 0-60mbar (Show 1-100 numerical value)

Flow: 20LPM

Power: 25W

Standby Power: 2W

Weight: 2.3Kg

Contour Dimension: Length 270* Wide 155* Height 90mm

Noise: 45dB

Table of Contents

Need help?

Do you have a question about the Air System 4 Valve replacement pump and is the answer not in the manual?

Page 1 Congratulations, and thank you for purchasing the leading replacement air system for luxury air mattresses. We know you will be pleased with the quality and performance of your investment. Your new REM Air System boasts the newest in remote sensor and whisper technology. In addition you will also be happy with the simplistic setup and user friendliness.
Page 2 Operational Instructions: 1. Connect pump with mattress hoses. Follow the pump connection diagram located by the pump valves to connect Left and Right hoses correctly. 2. When plugged into the outlet the pump LED light will show red for 30 seconds. The pump will calibrate with the remote control.
Page 3 Tips & Knowledge 10. The remote controls will work within 5 to 10 meters of pump. If the remote is out of rage it will read “Er” 11. Calibration: The remote and pump are calibrated before packaging. If the remote should read “Er”...