Rem Wired Air System replacement pump Instruction Manual

Wired remote control air pump

Wired Remote Control Air Pump Instruction Manual

Congratulations, and thank you for purchasing the leading replacement air

system for luxury air mattresses. We know you will be pleased with the

quality and performance of your investment. Your new REM Air System

boasts the newest in wired remote and whisper technology. In addition you

will also be happy with the simplistic setup and user friendliness.

Technical Speciﬁcations:

Model: REM Wired Air System replacement pump

Voltage: DC12V (Power Supply: 100-240VAC/50-60HZ)

Pressure: 0-60mbar (Show 1-100 numerical value)

Flow: 20LPM

Power: 25W

Standby Power: 2W

Weight: 2.3Kg

Contour Dimension: Length 260* Wide 155* Height 105mm

Table of Contents

Need help?

Do you have a question about the Wired Air System replacement pump and is the answer not in the manual?

Judy Cozine

April 21, 2025

Can I disconnect and then reconnect my REM machine from my sleep number bed without cutting the tubing? Ifso how do I do it ?

Page 1 Congratulations, and thank you for purchasing the leading replacement air system for luxury air mattresses. We know you will be pleased with the quality and performance of your investment. Your new REM Air System boasts the newest in wired remote and whisper technology. In addition you will also be happy with the simplistic setup and user friendliness.
Page 2 Pressure Recovery Activating Memory Right Side Pressure Level Left Side Pressure Scrolling Bar Inflation Pressure View Memory Deflation Pressure Recovery Operational Instructions: 1. Turn on: Power on by connecting power source into outlet and plugging opposite end into the pump input receiver. 2.
Page 3 is then memorized and your new memory setting is established. (You can save a different memory setting for each chamber in a dual chamber mattress. The default level is “25.” 7. Pressure Recovery: By pressing the “Pressure Recovery” button the user will be able to recover the previous level set.