Feel free to call Chandler Systems when you need additional help. We also have many resources located on our website including instructional videos, and images. DROP Connect is also active on various social media pages! Feel free to follow us for the most up to date information and news!
All DROP pistons have a patented water shutoff position (U.S. Patents 9714715 & 10012319), which can be used by a DROP system to protect properties from the risk of water damage from leaks and water breaks.
Page 6
OPERATIONS All DROP 1” valves include a turbine flow meter that is integral to the valve body. The meter is quick to access without having to separate any plumbing in case of needing to service the meter. Simply turn the bypass valve to bypass and loosen the nut securing the water meter, then pull on the tab to remove the meter from the outlet port of the valve.
OPERATIONS DROP VALVE - LIGHTS - REGENERATION DROP Lights - During Regeneration When a treatment valve is in regeneration the lights will change color for each step in the regeneration process. While the valve is sitting in a step of the regeneration process the lights will be slowly fading from side to side (wobble).
Page 8
DROP valve control board. The first situation that may cause the need to change the device configura- tion is in the case of replacing a board in the system. If a generic DROP valve board is used, it may need configured to match the system that it is being installed into.
OPERATIONS ADVANCED CONFIGURATIONS Steps for advanced configuring of valve device components Follow the steps below to change the device configuration of a board, or these steps can be followed to find out what the current configuration of a board is set to. 1. If the valve is powered up, unplug it (and remove the battery if installed).
Page 13
SOFTENER VALVE Part No. Description Qty. 20016X003 RS1 Base Plate 20018X231 DROP Universal Piston & Rod 20001X226 10-24 Hex Screw 20561X253 Replacement Seal Spacer Kit End Spacer 20251X266 Drain Line Flow Control Button, 1.5GPM 20251X267 Drain Line Flow Control Button, 2.oGPM...
Page 15
Part No. Description Qty. 20016X003 RS1 Base Plate 20018X231 DROP Universal Piston & Rod 20001X226 10-24 Hex Screw 20561X253 Replacement Seal Spacer Kit End Spacer 20251X272 Drain Line Flow Control Button, 5.0GPM 20251X273 Drain Line Flow Control Button, 7.oGPM 20017X100...
Page 17
Part No. Description Qty. 20016X003 RS1 Base Plate 20018X231 DROP Universal Piston & Rod 20001X226 10-24 Hex Screw 20561X253 Replacement Seal Spacer Kit End Spacer 20251X272 Drain Line Flow Control Button, 5.0GPM 20251X273 Drain Line Flow Control Button, 7.oGPM 20017X100...
20018X028 Micro Switch (sm) EG5428-ND SC11 Micro Switch (screw) Board Screw Motor Screw 20018X017 DROP Slide Cover L-DFC DROP Label Note: 6,7,9 & 10 are optional based on valve type. 20018X100 DROP Powerhead with Twedo 20018X10 DROP Powerhead without Twedo...
1” Motorized Bypass P/N 20018X201 The Motorized Bypass is used to enable parallel DROP softeners or filters to increase the treatment flow capacity, or to allow for continuous service and maximizing softener efficiency. The motorized bypass op- tion should be ordered from the factory on valves that are to be installed in parallel. The motors and the handles of a bypass are interchangeable incase manual operation is desired in a maintenance situation.
DROP Dealer or more limited warranties and you should read all of the terms included in to DROP or a designated contractor is provided access to the installa- this form to make sure you understand your warranty.
Page 24
Copyright Chandler Systems Inc. DROP is a product of Chandler Systems Inc. All rights reserved Copyright Chandler Systems Inc. DROP is a product of Chandler Systems Inc. All rights reserved. Valve - 1in 0720TV...