Motorola V60i User Manual page 99

UG.GSM.book Page 99 Thursday, June 6, 2002 8:51 AM
Note Entry Sequence
Do This
1 Set the octave
(optional)
2 Set the note to a
sharp or flat, if
necessary
3 Select the note
(required)
4 Set length
(required)
5 Modify length
(optional)
You can perform the following tasks when creating a tone:
Task Action
Insert a rest Enter one or more rests
( characters) as needed in the tone
sequence. Set the length of the rest
( to ) after the rest, just as you
would for a note.
Repeat a note Use and to group a sequence of
sequence notes. After the sequence, enter
followed by a number to set the
number of repetitions.
Action
Set the octave ( to ) before
selecting the note. The octave
applies to the note and all
following notes until you change
it again.
Enter a sharp or flat ( or )
before selecting the note.
Press a keypad key.
Set the length ( to ) after
selecting the note. If you do not
specify a length, a (quarter
note) length is appended to the
note.
Enter a length modifier ( , , or )
after you set the length.
Customising Your Phone Settings - 99