Seat Adjustment - Doosan DX380LC-7K Operation And Maintenance Manual

Seat Adjustment

AVOID DEATH OR SERIOUS INJURY
Adjust the seat position before starting operation or after
changing the operator.
Do not adjust the seat position while the machine is moving
because a loss of control can occur. Always stop the
machine, apply the parking brake, and then adjust the seat.
Always fasten your seat belt while operating machine.
Adjust the seat so the control levers and pedals can be
operated freely and easily with the operator's back against
the backrest.
1. Forward/Backward Adjustment
Holding lever (1, Figure 170), raise it up, move the seat to
the desired position. Release lever to lock the seat in the
selected position. Adjustment range is 180 mm (7.1 in).
2. Adjusting Height of Seat and Depth of
Cushion
Seat Height
It is possible to move the seat up or down by combining
adjustments forward and rear tilt. Height adjustment is
60 mm (2.4 in).
Adjust height of seat by moving adjustment lever (2, Figure
170) up or down. Seat height can be adjusted by referring
to the weight indication window (3, Figure 170) on the right.
• Green: Standard weight
• Red: Underweight or overweight
Forward Tilt
Press the adjustment lever (4, Figure 170) to adjust the
seat cushion angle. (0"/+4"/+8")
Cushion Slide
Press the adjustment lever (5, Figure 170), and adjust the
seat cushion forward/backward by max. 50 mm, to fit with
the length of the operator's thigh.
DX380LC-7
WARNING
4
1
3
2
Figure 170
5
DS1901197
Operating Controls
2-81