Motorola ROKR,MOTOROKR Z6m User Manual page 51

Note: To extend battery life, set Bluetooth power to Off
when not in use. If you turn Bluetooth power Off, your
phone will not connect to accessories until you turn
Bluetooth power On and reconnect to the accessories.
pair with headset, handsfree
device, or computer
Before you try to connect with another Bluetooth
device, make sure your phone's Bluetooth power is on
and the device is in pairing mode (see the user guide
for the device you are attempting to pair with). You
cannot perform pairing while your phone is connected
to another device.
To pair your phone with another device:
Find it: s
w
> Settings > Connection > Bluetooth Link
> Audio Devices > [Look For Devices]
Your phone displays a list of devices located within
range of the phone. If your phone is already connected
to a device, your phone lists that device and identifies
%
it with a (in-use indicator).
After a connection is established with a device, no
other device can connect to your phone until the
currently connected device is disconnected.
1 Highlight a device in the list of devices your phone
found.
s
2 Press to connect the device.
3 If the device requests permission to bond with
your phone, select YES and enter the device PIN
code to create a secure connection with the
device.
Note: The default PIN code is 0000.
When the connection is made, the
indicator or a Bluetooth message displays in the home
screen, and the Bluetooth indicator light displays on
the outside of the phone (see page 2 for indicator
location).
à
(Bluetooth)
connections 49